Course Details in 2027/28 Session


If you find any data displayed on this website that should be amended, please contact the Curriculum Management Team.

Module Title LH Structural Engineering II
SchoolSchool of Engineering
Department Civil Engineering
Module Code 04 28468
Module Lead Pedro Vazquez-Martinez
Level Honours Level
Credits 20
Semester Semester 1
Pre-requisites
Co-requisites
Restrictions None
Contact Hours Lecture-40 hours
Seminar-2 hours
Tutorial-20 hours
Practical Classes and workshops-1 hours
Supervised time in studio/workshop-3 hours
Guided independent study-134 hours
Total: 200 hours
Exclusions
Description This module has two main parts: Structural Design and Structural Analysis. Five aspects of Structural Design are covered in this module as follow: 1-Structural steelwork:
Steelwork connections: introduction to simple bolted and welded connections, geometric considerations, methods of analysis of bolt groups and weld groups

Buckling and strength of steel columns: elements subjected to axial load and bending, effect of imperfections and end conditions, columns in frames

2-Reinforced Concrete
Elastic analysis: column design – axial load and moment and slender columns

3-Composite construction:
Analysis of composite sections, effect of construction sequence on composite action, shear at interface.

4 -Timber
Structural design of timber, timber strength classes, load duration and service class, design of timber beams and joists

5 - Masonry
Materials and material properties, calculation of unit strength and mortar grade required to carry vertical loads

The Structural Analysis part consists of two aspects:
1- Analysis of simple structures:
Bar and beam system will be analgised using the matrix displacement methods based on the principle of minimum potential energy.
2-Introduction to the general Finite Element Analysis method:
2D and 3D finite element models will be developed for truss and frame structures.

The following items will be covered in the Structural Analysis part:
  • General expressions of strains and stresses in a bar and a beam.
  • General expression of strain energy of bars and beams in terms of displacement variables.
  • Principle of minimum potential energy.
  • Concept of nodes, elements, nodal displacements, nodal forces and nodal degree of freedom.
  • Derivation of stiffness matrices for bar element and beam element.
  • Transform of element stiffness matrix from local to global coordinate systems.
  • Assembly of element stifnness matrices.
  • Concept of nodal internal and external forces and assembly of nodal forces.
Learning Outcomes By the end of the module students should be able to:
  • design and assess bolted and welded connections and explain the behaviour of steel columns under load
  • assess reinforced concrete sections at serviceability limit state
  • design and assess short and slender reinforced concrete columns at the ultimate limit state
  • design and assess steel-concrete composite beams
  • design and assess timber beams
  • design and assess masonry subjected to vertical loads
  • analyse statically indeterminate structures (trusses and frames) using matrix displacement methods and build the finite element analysis model for 2-D and 3-D trusses and frames.
  • conduct structural analyses using FEA software and understand the results obtained from the finite element analysis.
Assessment 28468-01 : Exam : Exam (Centrally Timetabled) - Written Unseen (50%)
28468-02 : Coursework : Coursework (50%)
Assessment Methods & Exceptions Assessment
50% Coursework
50% exam

Reassessment
100% exam
Other None
Reading List