Programme And Module Handbook
 
Course Details in 2020/21 Session


If you find any data displayed on this website that should be amended, please contact the Curriculum Management Team.

Module Title LM Bio-medical and Micro Engineering
SchoolSchool of Engineering
Department Mechanical Engineering
Module Code 04 33350
Module Lead Professor Duncan Shepherd
Level Masters Level
Credits 20
Semester Semester 1
Pre-requisites
Co-requisites
Restrictions None
Contact Hours Lecture-26 hours
Tutorial-14 hours
Guided independent study-160 hours
Total: 200 hours
Exclusions
Description The aim of the module is to give an overview of how mechanical engineering can be applied to medicine and micro engineering.

The following topics will be used to illustrate how mechanical engineers can apply their skills and knowledge in medicine:

  • Physiological systems
  • Biological systems & structures
  • Bone & connective tissues
  • Failure of connective tissues
  • Biomechanics
  • Computational methods
  • Model validation
  • Medical Device Design
  • Fracture fixation
  • Joint replacement
  • Tribology of joints
  • Pre-clinical testing.


The following topics will be used to illustrate how mechanical engineers can apply their skills and knowledge in micro engineering, particularly looking at manufacturing processes developed in the micro and nanofabrication industry:

  • micro electro mechanical systems (MEMS)
  • crystallography
  • material deposition
  • photo lithography
  • advanced lithography techniques
  • etching
  • micro mechanics,
  • microelectronics
  • design of applications such as accelerometers, pressure sensors, biosensors and optomechanical chemical systems.
Learning Outcomes By the end of the module students should be able to:

  • Demonstrate a comprehensive knowledge and understanding of biological systems and structures and how engineering can be used to investigate their mechanical properties and failure modes.
  • Demonstrate a comprehensive awareness of a range of biomaterials and be able to select an appropriate material for a medical device.
  • Use fundamental engineering principles to investigate the forces within human joints.
  • Demonstrate a wide knowledge and comprehensive understanding of the design process for medical devices and critically analyse the methodologies used for validation and verification.
  • Demonstrate an awareness of the legal requirements for medical devices, including health and safety and risk analysis.
  • Demonstrate a comprehensive knowledge and understanding of the science of crystallography in relation to the construction of MEMS components and the importance of crystal structures in MEMS fabrication.
  • Demonstrate a comprehensive knowledge and understanding of the deposition processes and various types of deposition used for microsystems fabrication.
  • Demonstrate knowledge and understanding of the three types of solids (amorphous, polycrystalline, and crystalline).
  • Identify, classify and critically assess the performance of crystal orientation based on Miller indices.
Assessment
Assessment Methods & Exceptions Assessment: One 3-hour formal written examination (100%) to be held during the University's main January examination period

Reassessment: Reassessment will normally only be allowed for students on the following programmes:

9757 MSc Advanced Mechanical Engineering 9758 PG Diploma Advanced Mechanical Engineering 9759 PG Certificate Advanced Mechanical Engineering 222A MSc Advanced Mechanical Engineering (PT)

One 3-hour formal written examination (100%) to be held during the University’s supplementary examination period.
Other
Reading List