Programme And Module Handbook
 
Course Details in 2023/24 Session


If you find any data displayed on this website that should be amended, please contact the Curriculum Management Team.

Module Title LI Physical Materials Science B
SchoolMetallurgy and Materials
Department Metallurgy & Materials
Module Code 04 34066
Module Lead Alessandra Mottura
Level Intermediate Level
Credits 10
Semester Semester 2
Pre-requisites LC Fundamentals of Materials Science - (04 31173)
Co-requisites
Restrictions None
Contact Hours Lecture-22 hours
Tutorial-4 hours
Practical Classes and workshops-4 hours
Guided independent study-70 hours
Total: 100 hours
Exclusions
Description The module will build on the description of phase diagrams, bonding and diffusion from level C to introduce time dependence and the factors controlling driving forces in metallic and non-metallic systems. Aspects of processing will be introduced as well as solid state thermodynamics and kinetics for nucleation and growth (diffusional) leading to JMAK, reconstructive, displacive and mixed transformations using steel and ceramic examples, TTT and CCT diagrams.

These link to the requirements in the QAA Materials benchmark statement of 2017, in particular:
  • 3.4.ii phase equilibria and phase transformations multiphase materials, thermodynamic and kinetic aspects;
  • 3.4.iii structure on the nano, micro, meso and macro scales;
  • 3.4.xi materials design compositional variation and processing to achieve required microstructures, and hence properties.
Learning Outcomes By the end of the module students should be able to:
  • Use accepted diagrams, standards and mathematical models to predict the extent of transformations in different systems;
  • Use solutions to Fick’s second law to predict concentration profiles given a set of boundary conditions;
  • Describe the fundamental processes occurring during reconstructive, displacive and mixed transformations;
  • Suggest appropriate processing methods to control grain size and precipitation in a variety of systems;
  • Use mathematical models to predict the evolution of microstructure.
These relate to AHEP3 learning outcomes:
  • Demonstrate knowledge and understanding of scientific principles and methodology necessary to underpin their education in their engineering discipline, to enable appreciation of its scientific and engineering context, and to support their understanding of relevant historical, current and future developments and technologies (SM1);
  • Demonstrate knowledge and understanding of mathematical and statistical methods necessary to underpin their education in their engineering discipline and to enable them to apply mathematical and statistical methods, tools and notations proficiently in the analysis and solution of engineering problems (SM2);
  • Understand engineering principles and the ability to apply them to analyse key engineering processes (EA1);
  • Demonstrate knowledge of characteristics of particular materials, equipment, processes, or products (EP2);
  • Apply relevant practical and laboratory skills (EP3);
  • Understand the use of technical literature and other information sources (EP4);
  • Understand appropriate codes of practice and industry standards (EP6);
  • Demonstrate a comprehensive knowledge and understanding of mathematical and computational models relevant to the engineering discipline, and an appreciation of their limitations (SM5m).
Assessment 34066-01 : Exam : Exam (Centrally Timetabled) - Written Unseen (50%)
34066-02 : MCQ : Coursework (50%)
Assessment Methods & Exceptions Assessment:
50% coursework (20% MCQ, 30% Tutorial Sheet)
50% Closed book exam
Other
Reading List